bufbuild/connect-go was archived with maintenance transferred to the
ConnectRPC organization. Gitea's protobuf library for actions now uses
the ConnectRPC dependency as of v0.4.0, removing the need to continue
using the dead package.
When receiving a signal (INT or TERM) wait for running jobs to
complete instead of terminating them right away.
The new shutdown_timeout configuration setting can be used to force
the termination after a grace delay. If not specified or zero it will
shutdown immediately, for backward compatibility. It will be the case
with existing configuration files or when a configuration file is not
specified.
The config.yml created with the generate-config subcommand will
however default shutdown_timeout to 3h (same as timeout) because it is
likely what a new admin would expect: shutting down waits for jobs to
complete and not abort them.
If a job is detected as skipped, its steps should also be `skipped`.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/500
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
(cherry picked from commit 45270656dfb7a0c8b382df3a9e8a212dbe5615d8)
Needs https://github.com/go-gitea/gitea/pull/28885 to provide jwt if sent by server
Could fix#459, but that has not been verified.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/471
Reviewed-by: delvh <dev.lh@web.de>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
Co-committed-by: Christopher Homberger <christopher.homberger@web.de>
(cherry picked from commit e6630e2e369f41fc9d9f9e570610611da18dda1d)
I accidently closed my previous PR #384
This PR replaces invalid UTF-8 character in a stream with `?` character. On Windows Server 2019 other characters are replaced by `?` as well so it's consistent.
fixes#452
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/453
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: hakito <hakito@noreply.gitea.com>
Co-committed-by: hakito <hakito@noreply.gitea.com>
(cherry picked from commit daf52d0e628d2d57b9f50a2556e404a3f05c34aa)
Increase the fetch interval to at least 30 seconds if the runner is
configured to be used with Codeberg. This avoids it being rate limited
when they do actual work and reduces load on Codeberg.
Close#271
What it does: instead of forcing the value of `ForcePull` to false, the user can now configure it on the runner yaml
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/339
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Gianni Angelozzi <gianni@sistema3.it>
Co-committed-by: Gianni Angelozzi <gianni@sistema3.it>
- Removed `deadcode`, `structcheck`, and `varcheck` linters from `.golangci.yml`
- Fixed a typo in a comment in `daemon.go`
- Renamed `defaultActionsUrl` to `defaultActionsURL` in `exec.go`
- Removed unnecessary else clause in `exec.go` and `runner.go`
- Simplified variable initialization in `exec.go`
- Changed function name from `getHttpClient` to `getHTTPClient` in `http.go`
- Removed unnecessary else clause in `labels_test.go`
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/289
Co-authored-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-committed-by: Bo-Yi Wu <appleboy.tw@gmail.com>
This PR
- adds the `cache-server` command so act_runner can run as a cache server. When running as a cache server, act_runner only processes the requests related to cache and does not run jobs.
- adds the `external_server` configuration for cache. If specified, act_runner will use this URL as the ACTIONS_CACHE_URL instead of starting a cache server itself.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/275
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Follow #242, #244Fixes#258
Users could use `docker_host` configuration to specify which docker daemon will be used by act_runner.
- If `docker_host` is **empty**, act_runner will find an available docker host automatically.
- If `docker_host` is **"-"**, act_runner will find an available docker host automatically, but the docker host won't be mounted to the job containers and service containers.
- If `docker_host` is **not empty or "-"**, the specified docker host will be used. An error will be returned if it doesn't work.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/260
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Adds a new section to the configuration which is used
to control options when running in host mode.
The first option added is to allow configuration
of the location workspaces get created in.
Depends on ~~gitea/act#65~~
Will resolve#235
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/238
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Marius Zwicker <marius.zwicker@mlba-team.de>
Co-committed-by: Marius Zwicker <marius.zwicker@mlba-team.de>
Follow #242.
Move `docker.host` to `container.docker_host`.
There are already some options for docker/container in `container`, so developers could get confused about where to add options.
It's breaking, but I think it's OK since `docker.host` was added just two days ago.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/244
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Follow https://gitea.com/gitea/act/pulls/60, https://gitea.com/gitea/act/pulls/64
This PR adds the `valid_volumes` configuration. `valid_volumes` is a sequence containing the volumes (including bind mounts) that can be mounted to the container. By default, `valid_volumes` is empty, which means that no volumes can be mounted. Users can specify multiple valid volumes and [glob](https://github.com/gobwas/glob) is supported.
All volumes will be allowed when using `exec` to run workflows locally.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/226
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
- Import "path", "runtime", "strconv", and "strings" packages in daemon.go
- Move "Starting runner daemon" log message to a different location
- Refactor log formatter initialization and add debug level caller information
- Split Config struct into separate Log, Runner, Cache, and Container structs with comments in config.go
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/225
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-committed-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Close https://gitea.com/gitea/act_runner/issues/177
Related https://gitea.com/gitea/act/pulls/56
### ⚠️ Breaking
The `container.network_mode` is a deprecated configuration item. It may be removed after Gitea 1.20 released.
Previously, if the value of `container.network_mode` is `bridge`, it means that `act_runner` will create a new network for job.But `bridge` is easily confused with the bridge network created by Docker by default.
We recommand that using `container.network` to specify the network to which containers created by `act_runner` connect.
### 🆕 container.network
The configuration file of `act_runner` add a new item of `contianer.network`.
In `config.example.yaml`:
```yaml
container:
# Specifies the network to which the container will connect.
# Could be host, bridge or the name of a custom network.
# If it's empty, act_runner will create a network automatically.
network: ""
```
As the comment in the example above says, the purpose of the `container.network` is specifying the network to which containers created by `act_runner` will connect.
`container.network` accepts the following valid values:
- `host`: All of containers (including job containers and service contianers) created by `act_runner` will be connected to the network named `host` which is created automatically by Docker. Containers will share the host’s network stack and all interfaces from the host will be available to these containers.
- `bridge`: It is similar to `host`. All of containers created by `act_runner` will be connected to the network named `bridge` which is created automatically by Docker. All containers connected to the `bridge` (Perhaps there are containers that are not created by `act_runner`) are allowed to communicate with each other, while providing isolation from containers which are not connected to that `bridge` network.
- `<custom_network>`: Please make sure that the `<custom_network>` network already exists firstly (`act_runner` does not detect whether the specified network exists currently. If not exists yet, will return error in the stage of `docker create`). All of containers created by `act_runner` will be connected to `<custom_network>`. After the job is executed, containers are removed and automatically disconnected from the `<custom_network>`.
- empty: `act_runner` will create a new network for each job container and their service containers (if defined in workflow). So each job container and their service containers share a network environment, but are isolated from others container and the Docker host. Of course, these networks created by `act_runner` will be removed at last.
### Others
- If you do not have special needs, we highly recommend that setting `container.network` to empty string (and do not use `container.network_mode` any more). Because the containers created by `act_runner` will connect to the networks that are created by itself. This point will provide better isolation.
- If you set `contianer.network` to empty string or `<custom_network>`, we can be access to service containers by `<service-id>:<port>` in the steps of job. Because we added an alias to the service container when connecting to the network.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/184
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
Fixes#145
At present, the working directory of a work flow is a path like `/<owner>/<repo>`, so the directory may conflict with system directory like `/usr/bin`. We need to add a parent directory for the working directory.
In this PR, the parent directory is `/workspace` by default and users could configure it by the `workdir_parent` option.
This change doesn't affect the host mode because in host mode the working directory will always be in `$HOME/.cache/act/` directory.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/154
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Establishes a simple framework for supporting workflow commands.
Fully implements `::add-mask::`, `::debug::`, and `::stop-commands::`.
Addresses #148
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/149
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Søren L. Hansen <sorenisanerd@gmail.com>
Co-committed-by: Søren L. Hansen <sorenisanerd@gmail.com>
Previously, the `Close` func returns incorrectly so that the logs may not be reported.
This PR fixes the incorrect return and sets the `StoppedAt` to get the correct task duration.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/126
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
This adds a very simple Dockerfile and run script for running `act_runner` as a container.
It also allows setting `Privileged` and `ContainerOptions` flags via the new config file when spawning task containers. The combination makes it possible to use Docker-in-Docker (which requires `privileged` mode) as well as pass any other options child Docker containers may require.
For example, if Gitea is running in Docker on the same machine, for the `checkout` action to behave as expected from a task container launched by `act_runner`, it might be necessary to map the hostname via something like:
```
container:
network_mode: bridge
privileged: true
options: --add-host=my.gitea.hostname:host-gateway
```
> NOTE: Description updated to reflect latest code.
> NOTE: Description updated to reflect latest code (again).
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/84
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Thomas E Lackey <telackey@bozemanpass.com>
Co-committed-by: Thomas E Lackey <telackey@bozemanpass.com>
Mike Rochefort