Merge pull request #465 from actions/robherley/v4-documentation

Update documentation for v4
v4-beta
Rob Herley 2023-12-13 13:00:16 -05:00 committed by GitHub
commit f391bb91a3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
6 changed files with 2746 additions and 381 deletions

View File

@ -10,9 +10,11 @@ on:
push:
branches:
- main
paths-ignore:
- '**.md'
pull_request:
branches:
- main
paths-ignore:
- '**.md'
workflow_dispatch:
jobs:
@ -20,33 +22,32 @@ jobs:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
- uses: actions/checkout@v4
- name: Setup Node 16
uses: actions/setup-node@v3
- name: Setup Node 20
uses: actions/setup-node@v4
with:
node-version: 16.x
node-version: 20.x
cache: 'npm'
- name: Install dependencies
run: npm ci
- name: Move the committed index.js file
run: mv dist/index.js /tmp
- name: Rebuild with tsc
- name: Rebuild the dist/ directory
run: npm run build
- name: Rebuild the index.js file
run: npm run release
- name: Compare the expected and actual index.js files
run: git diff --ignore-all-space dist/index.js /tmp/index.js
- name: Compare the expected and actual dist/ directories
run: |
if [ "$(git diff --ignore-space-at-eol dist/ | wc -l)" -gt "0" ]; then
echo "Detected uncommitted changes after build. See status below:"
git diff
exit 1
fi
id: diff
# If index.js was different than expected, upload the expected version as an artifact
- uses: actions/upload-artifact@v3
- uses: actions/upload-artifact@v4-beta
if: ${{ failure() && steps.diff.conclusion == 'failure' }}
with:
name: index.js
path: dist/index.js
name: dist
path: dist/

View File

@ -13,7 +13,7 @@ jobs:
runs-on: ubuntu-latest
name: Check licenses
steps:
- uses: actions/checkout@v2
- uses: actions/checkout@v4
- run: npm ci
- name: Install licensed
run: |

View File

@ -1,4 +1,5 @@
name: Test
on:
push:
branches:
@ -10,7 +11,6 @@ on:
- '**.md'
jobs:
build:
name: Build
@ -23,12 +23,12 @@ jobs:
steps:
- name: Checkout
uses: actions/checkout@v3
uses: actions/checkout@v4
- name: Setup Node 16
uses: actions/setup-node@v3
- name: Setup Node 20
uses: actions/setup-node@v4
with:
node-version: 16.x
node-version: 20.x
cache: 'npm'
- name: Install dependencies
@ -54,33 +54,26 @@ jobs:
mkdir -p path/to/dir-3
echo "Lorem ipsum dolor sit amet" > path/to/dir-1/file1.txt
echo "Hello world from file #2" > path/to/dir-2/file2.txt
echo "This is a going to be a test for a large enough file that should get compressed with GZip. The @actions/artifact package uses GZip to upload files. This text should have a compression ratio greater than 100% so it should get uploaded using GZip" > path/to/dir-3/gzip.txt
# Upload a single file artifact
- name: 'Upload artifact #1'
uses: ./
with:
name: 'Artifact-A'
name: 'Artifact-A-${{ matrix.runs-on }}'
path: path/to/dir-1/file1.txt
# Upload using a wildcard pattern, name should default to 'artifact' if not provided
# Upload using a wildcard pattern
- name: 'Upload artifact #2'
uses: ./
with:
name: 'Artifact-Wildcard-${{ matrix.runs-on }}'
path: path/**/dir*/
# Upload a directory that contains a file that will be uploaded with GZip
# Upload a multi-path artifact
- name: 'Upload artifact #3'
uses: ./
with:
name: 'GZip-Artifact'
path: path/to/dir-3/
# Upload a directory that contains a file that will be uploaded with GZip
- name: 'Upload artifact #4'
uses: ./
with:
name: 'Multi-Path-Artifact'
name: 'Multi-Path-Artifact-${{ matrix.runs-on }}'
path: |
path/to/dir-1/*
path/to/dir-[23]/*
@ -88,9 +81,9 @@ jobs:
# Download Artifact #1 and verify the correctness of the content
- name: 'Download artifact #1'
uses: actions/download-artifact@v3
uses: actions/download-artifact@v4-beta
with:
name: 'Artifact-A'
name: 'Artifact-A-${{ matrix.runs-on }}'
path: some/new/path
- name: 'Verify Artifact #1'
@ -108,9 +101,9 @@ jobs:
# Download Artifact #2 and verify the correctness of the content
- name: 'Download artifact #2'
uses: actions/download-artifact@v3
uses: actions/download-artifact@v4-beta
with:
name: 'artifact'
name: 'Artifact-Wildcard-${{ matrix.runs-on }}'
path: some/other/path
- name: 'Verify Artifact #2'
@ -127,31 +120,11 @@ jobs:
}
shell: pwsh
# Download Artifact #3 and verify the correctness of the content
- name: 'Download artifact #3'
uses: actions/download-artifact@v3
with:
name: 'GZip-Artifact'
path: gzip/artifact/path
# Because a directory was used as input during the upload the parent directories, path/to/dir-3/, should not be included in the uploaded artifact
- name: 'Verify Artifact #3'
run: |
$gzipFile = "gzip/artifact/path/gzip.txt"
if(!(Test-Path -path $gzipFile))
{
Write-Error "Expected file do not exist"
}
if(!((Get-Content $gzipFile) -ceq "This is a going to be a test for a large enough file that should get compressed with GZip. The @actions/artifact package uses GZip to upload files. This text should have a compression ratio greater than 100% so it should get uploaded using GZip"))
{
Write-Error "File contents of downloaded artifact is incorrect"
}
shell: pwsh
# Download Artifact #4 and verify the correctness of the content
- name: 'Download artifact #4'
uses: actions/download-artifact@v3
uses: actions/download-artifact@v4-beta
with:
name: 'Multi-Path-Artifact'
name: 'Multi-Path-Artifact-${{ matrix.runs-on }}'
path: multi/artifact
- name: 'Verify Artifact #4'

276
README.md
View File

@ -1,34 +1,112 @@
# Upload-Artifact v4 beta
# `@actions/upload-artifact`
❗ Not publicly available. If you try to use this version then it will fail. Available only internally at GitHub while in development. Stay tuned for public announcements soon about broader availability❗
This uploads artifacts from your workflow allowing you to share data between jobs and store data once a workflow is complete.
Upload [Actions Artifacts](https://docs.github.com/en/actions/using-workflows/storing-workflow-data-as-artifacts) from your Workflow Runs. Internally powered by [@actions/artifact](https://github.com/actions/toolkit/tree/main/packages/artifact) package.
See also [download-artifact](https://github.com/actions/download-artifact).
# What's new
- [`@actions/upload-artifact`](#actionsupload-artifact)
- [v4 - What's new](#v4---whats-new)
- [Improvements](#improvements)
- [Breaking Changes](#breaking-changes)
- [Usage](#usage)
- [Inputs](#inputs)
- [Outputs](#outputs)
- [Examples](#examples)
- [Upload an Individual File](#upload-an-individual-file)
- [Upload an Entire Directory](#upload-an-entire-directory)
- [Upload using a Wildcard Pattern](#upload-using-a-wildcard-pattern)
- [Upload using Multiple Paths and Exclusions](#upload-using-multiple-paths-and-exclusions)
- [Altering compressions level (speed v. size)](#altering-compressions-level-speed-v-size)
- [Customization if no files are found](#customization-if-no-files-are-found)
- [(Not) Uploading to the same artifact](#not-uploading-to-the-same-artifact)
- [Environment Variables and Tilde Expansion](#environment-variables-and-tilde-expansion)
- [Retention Period](#retention-period)
- [Using Outputs](#using-outputs)
- [Example output between steps](#example-output-between-steps)
- [Example output between jobs](#example-output-between-jobs)
- [Limitations](#limitations)
- [Number of Artifacts](#number-of-artifacts)
- [Zip archives](#zip-archives)
- [Permission Loss](#permission-loss)
- [Where does the upload go?](#where-does-the-upload-go)
🚧 Under construction 🚧
Big changes coming...
## v4 - What's new
Refer [here](https://github.com/actions/upload-artifact/tree/releases/v3) for the previous version
> [!IMPORTANT]
> upload-artifact@v4+ is not currently supported on GHES yet. If you are on GHES, you must use [v3](https://github.com/actions/upload-artifact/releases/tag/v3).
# Usage
The release of upload-artifact@v4 and download-artifact@v4 are major changes to the backend architecture of Artifacts. They have numerous performance and behavioral improvements.
See [action.yml](action.yml)
For more information, see the [`@actions/artifact`](https://github.com/actions/toolkit/tree/main/packages/artifact) documentation.
### Improvements
1. Uploads are significantly faster, upwards of 90% improvement in worst case scenarios.
2. Once uploaded, an Artifact ID is returned and Artifacts are immediately available in the UI and [REST API](https://docs.github.com/en/rest/actions/artifacts). Previously, you would have to wait for the run to be completed before an ID was available or any APIs could be utilized.
3. The contents of an Artifact are uploaded together into an _immutable_ archive. They cannot be altered by subsequent jobs. Both of these factors help reduce the possibility of accidentally corrupting Artifact files.
4. The compression level of an Artifact can be manually tweaked for speed or size reduction.
### Breaking Changes
1. On self hosted runners, additional [firewall rules](https://github.com/actions/toolkit/tree/main/packages/artifact#breaking-changes) may be required.
2. Uploading to the same named Artifact multiple times.
Due to how Artifacts are created in this new version, it is no longer possible to upload to the same named Artifact multiple times. You must either split the uploads into multiple Artifacts with different names, or only upload once. Otherwise you _will_ encounter an error.
3. Limit of Artifacts for an individual job. Each job in a workflow run now has a limit of 10 artifacts.
## Usage
### Inputs
```yaml
- uses: actions/upload-artifact@v4
with:
# Name of the artifact to upload.
# Optional. Default is 'artifact'
name:
# A file, directory or wildcard pattern that describes what to upload
# Required.
path:
# The desired behavior if no files are found using the provided path.
# Available Options:
# warn: Output a warning but do not fail the action
# error: Fail the action with an error message
# ignore: Do not output any warnings or errors, the action does not fail
# Optional. Default is 'warn'
if-no-files-found:
# Duration after which artifact will expire in days. 0 means using default retention.
# Minimum 1 day.
# Maximum 90 days unless changed from the repository settings page.
# Optional. Defaults to repository settings.
retention-days:
# The level of compression for Zlib to be applied to the artifact archive.
# The value can range from 0 to 9.
# For large files that are not easily compressed, a value of 0 is recommended for significantly faster uploads.
# Optional. Default is '6'
compression-level:
```
### Outputs
| Name | Description | Example |
| - | - | - |
| `artifact-id` | GitHub ID of an Artifact, can be used by the REST API | `1234` |
## Examples
### Upload an Individual File
```yaml
steps:
- uses: actions/checkout@v3
- run: mkdir -p path/to/artifact
- run: echo hello > path/to/artifact/world.txt
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: my-artifact
path: path/to/artifact/world.txt
@ -37,7 +115,7 @@ steps:
### Upload an Entire Directory
```yaml
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: my-artifact
path: path/to/artifact/ # or path/to/artifact
@ -46,7 +124,7 @@ steps:
### Upload using a Wildcard Pattern
```yaml
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: my-artifact
path: path/**/[abc]rtifac?/*
@ -55,7 +133,7 @@ steps:
### Upload using Multiple Paths and Exclusions
```yaml
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: my-artifact
path: |
@ -84,62 +162,105 @@ If multiple paths are provided as input, the least common ancestor of all the se
Relative and absolute file paths are both allowed. Relative paths are rooted against the current working directory. Paths that begin with a wildcard character should be quoted to avoid being interpreted as YAML aliases.
The [@actions/artifact](https://github.com/actions/toolkit/tree/main/packages/artifact) package is used internally to handle most of the logic around uploading an artifact. There is extra documentation around upload limitations and behavior in the toolkit repo that is worth checking out.
### Altering compressions level (speed v. size)
If you are uploading large or easily compressable data to your artifact, you may benefit from tweaking the compression level. By default, the compression level is `6`, the same as GNU Gzip.
The value can range from 0 to 9:
- 0: No compression
- 1: Best speed
- 6: Default compression (same as GNU Gzip)
- 9: Best compression
Higher levels will result in better compression, but will take longer to complete.
For large files that are not easily compressed, a value of `0` is recommended for significantly faster uploads.
For instance, if you are uploading random binary data, you can save a lot of time by opting out of compression completely, since it won't benefit:
```yaml
- name: Make a 1GB random binary file
run: |
dd if=/dev/urandom of=my-1gb-file bs=1M count=1000
- uses: actions/upload-artifact@v4
with:
name: my-artifact
path: my-1gb-file
compression-level: 0 # no compression
```
But, if you are uploading data that is easily compressed (like plaintext, code, etc) you can save space and cost by having a higher compression level. But this will be heavier on the CPU therefore slower to upload:
```yaml
- name: Make a file with a lot of repeated text
run: |
for i in {1..100000}; do echo -n 'foobar' >> foobar.txt; done
- uses: actions/upload-artifact@v4
with:
name: my-artifact
path: foobar.txt
compression-level: 9 # maximum compression
```
### Customization if no files are found
If a path (or paths), result in no files being found for the artifact, the action will succeed but print out a warning. In certain scenarios it may be desirable to fail the action or suppress the warning. The `if-no-files-found` option allows you to customize the behavior of the action if no files are found:
```yaml
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: my-artifact
path: path/to/artifact/
if-no-files-found: error # 'warn' or 'ignore' are also available, defaults to `warn`
```
### Conditional Artifact Upload
### (Not) Uploading to the same artifact
To upload artifacts only when the previous step of a job failed, use [`if: failure()`](https://help.github.com/en/articles/contexts-and-expression-syntax-for-github-actions#job-status-check-functions):
```yaml
- uses: actions/upload-artifact@v4-beta
if: failure()
with:
name: my-artifact
path: path/to/artifact/
```
### Uploading without an artifact name
You can upload an artifact without specifying a name
```yaml
- uses: actions/upload-artifact@v4-beta
with:
path: path/to/artifact/world.txt
```
If not provided, `artifact` will be used as the default name which will manifest itself in the UI after upload.
### Uploading to the same artifact
Unlike earlier versions of `upload-artifact`, uploading to the same artifact via multiple jobs is _not_ supported with `v4`.
Unlike earlier versions of `upload-artifact`, uploading to the same artifact via multiple jobs is _not_ supported with `v4`.
```yaml
- run: echo hi > world.txt
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
# implicitly named as 'artifact'
path: world.txt
- run: echo howdy > extra-file.txt
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
# also implicitly named as 'artifact', will fail here!
path: extra-file.txt
```
Artifact names must be unique since each created artifact is idempotent so multiple jobs cannot modify the same artifact.
In matrix scenarios, be careful to not accidentally upload to the same artifact, or else you will encounter conflict errors. It would be best to name the artifact _with_ a prefix or suffix from the matrix:
```yaml
jobs:
upload:
name: Generate Build Artifacts
strategy:
matrix:
os: [ubuntu-latest, windows-latest]
version: [a, b, c]
runs-on: ${{ matrix.os }}
steps:
- name: Build
run: ./some-script --version=${{ matrix.version }} > my-binary
- name: Upload
uses: actions/upload-artifact@v4
with:
name: binary-${{ matrix.os }}-${{ matrix.version }}
path: my-binary
```
This will result in artifacts like: `binary-ubuntu-latest-a`, `binary-windows-latest-b`, and so on.
Previously the behavior _allowed_ for the artifact names to be the same which resulted in unexpected mutations and accidental corruption. Artifacts created by upload-artifact@v4 are immutable.
### Environment Variables and Tilde Expansion
You can use `~` in the path input as a substitute for `$HOME`. Basic tilde expansion is supported:
@ -148,7 +269,7 @@ You can use `~` in the path input as a substitute for `$HOME`. Basic tilde expan
- run: |
mkdir -p ~/new/artifact
echo hello > ~/new/artifact/world.txt
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: Artifacts-V4-beta
path: ~/new/**/*
@ -163,7 +284,7 @@ Environment variables along with context expressions can also be used for input.
- run: |
mkdir -p ${{ github.workspace }}/artifact
echo hello > ${{ github.workspace }}/artifact/world.txt
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: ${{ env.name }}-name
path: ${{ github.workspace }}/artifact/**/*
@ -173,11 +294,11 @@ For environment variables created in other steps, make sure to use the `env` exp
```yaml
steps:
- run: |
- run: |
mkdir testing
echo "This is a file to upload" > testing/file.txt
echo "artifactPath=testing/file.txt" >> $GITHUB_ENV
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
with:
name: artifact
path: ${{ env.artifactPath }} # this will resolve to testing/file.txt at runtime
@ -192,7 +313,7 @@ Artifacts are retained for 90 days by default. You can specify a shorter retenti
run: echo "I won't live long" > my_file.txt
- name: Upload Artifact
uses: actions/upload-artifact@v4-beta
uses: actions/upload-artifact@v4
with:
name: my-artifact
path: my_file.txt
@ -201,14 +322,14 @@ Artifacts are retained for 90 days by default. You can specify a shorter retenti
The retention period must be between 1 and 90 inclusive. For more information see [artifact and log retention policies](https://docs.github.com/en/free-pro-team@latest/actions/reference/usage-limits-billing-and-administration#artifact-and-log-retention-policy).
## Outputs
### Using Outputs
If an artifact upload is successful then an `artifact-id` output is available. This ID is a unique identifier that can be used with [Artifact REST APIs](https://docs.github.com/en/rest/actions/artifacts).
### Example output between steps
#### Example output between steps
```yml
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
id: artifact-upload-step
with:
name: my-artifact
@ -218,7 +339,7 @@ If an artifact upload is successful then an `artifact-id` output is available. T
run: echo 'Artifact ID is ${{ steps.artifact-upload-step.outputs.artifact-id }}'
```
### Example output between jobs
#### Example output between jobs
```yml
jobs:
@ -227,7 +348,7 @@ jobs:
outputs:
output1: ${{ steps.my-artifact.outputs.artifact-id }}
steps:
- uses: actions/upload-artifact@v4-beta
- uses: actions/upload-artifact@v4
id: artifact-upload-step
with:
name: my-artifact
@ -241,6 +362,35 @@ jobs:
run: echo "Artifact ID from previous job is $OUTPUT1"
```
## Limitations
### Number of Artifacts
Within an individual job, there is a limit of 10 artifacts that can be created for that job.
You may also be limited by Artifacts if you have exceeded your shared storage quota. Storage is calculated every 6-12 hours. See [the documentation](https://docs.github.com/en/billing/managing-billing-for-github-actions/about-billing-for-github-actions#calculating-minute-and-storage-spending) for more info.
### Zip archives
When an Artifact is uploaded, all the files are assembled into an immutable Zip archive. There is currently no way to download artifacts in a format other than a Zip or to download individual artifact contents.
### Permission Loss
File permissions are not maintained during artifact upload. All directories will have `755` and all files will have `644`. For example, if you make a file executable using `chmod` and then upload that file, post-download the file is no longer guaranteed to be set as an executable.
If you must preserve permissions, you can `tar` all of your files together before artifact upload. Post download, the `tar` file will maintain file permissions and case sensitivity.
```yaml
- name: 'Tar files'
run: tar -cvf my_files.tar /path/to/my/directory
- name: 'Upload Artifact'
uses: actions/upload-artifact@v4
with:
name: my-artifact
path: my_files.tar
```
## Where does the upload go?
At the bottom of the workflow summary page, there is a dedicated section for artifacts. Here's a screenshot of something you might see:
@ -250,13 +400,3 @@ At the bottom of the workflow summary page, there is a dedicated section for art
There is a trashcan icon that can be used to delete the artifact. This icon will only appear for users who have write permissions to the repository.
The size of the artifact is denoted in bytes. The displayed artifact size denotes the size of the zip that `upload-artifact` creates during upload.
## Additional Documentation
See [Storing workflow data as artifacts](https://docs.github.com/en/actions/advanced-guides/storing-workflow-data-as-artifacts) for additional examples and tips.
See extra documentation for the [@actions/artifact](https://github.com/actions/toolkit/blob/main/packages/artifact/docs/additional-information.md) package that is used internally regarding certain behaviors and limitations.
# License
The scripts and documentation in this project are released under the [MIT License](LICENSE).

2745
package-lock.json generated

File diff suppressed because it is too large Load Diff

View File

@ -1,7 +1,7 @@
{
"name": "upload-artifact",
"version": "3.0.0",
"description": "Upload a build artifact that can be used by subsequent workflow steps",
"version": "4.0.0",
"description": "Upload an Actions Artifact in a workflow run",
"main": "dist/index.js",
"scripts": {
"build": "tsc",