composer/doc/03-cli.md

Command-line interface

You've already learned how to use the command-line interface to do some things. This chapter documents all the available commands.

To get help from the command-line, simply call composer or composer list to see the complete list of commands, then --help combined with any of those can give you more information.

Global Options

The following options are available with every command:

• --verbose (-v): Increase verbosity of messages.
• --help (-h): Display help information.
• --quiet (-q): Do not output any message.
• --no-interaction (-n): Do not ask any interactive question.
• --working-dir (-d): If specified, use the given directory as working directory.
• --profile: Display timing and memory usage information
• --ansi: Force ANSI output.
• --no-ansi: Disable ANSI output.
• --version (-V): Display this application version.

Process Exit Codes

• 0: OK
• 1: Generic/unknown error code
• 2: Dependency solving error code

init

In the Libraries chapter we looked at how to create a composer.json by hand. There is also an init command available that makes it a bit easier to do this.

When you run the command it will interactively ask you to fill in the fields, while using some smart defaults.

$ php composer.phar init

Options

• --name: Name of the package.
• --description: Description of the package.
• --author: Author name of the package.
• --homepage: Homepage of the package.
• --require: Package to require with a version constraint. Should be in format foo/bar:1.0.0.
• --require-dev: Development requirements, see --require.
• --stability (-s): Value for the minimum-stability field.

install

The install command reads the composer.json file from the current directory, resolves the dependencies, and installs them into vendor.

$ php composer.phar install

If there is a composer.lock file in the current directory, it will use the exact versions from there instead of resolving them. This ensures that everyone using the library will get the same versions of the dependencies.

If there is no composer.lock file, composer will create one after dependency resolution.

Options

• --prefer-source: There are two ways of downloading a package: source and dist. For stable versions composer will use the dist by default. The source is a version control repository. If --prefer-source is enabled, composer will install from source if there is one. This is useful if you want to make a bugfix to a project and get a local git clone of the dependency directly.
• --prefer-dist: Reverse of --prefer-source, composer will install from dist if possible. This can speed up installs substantially on build servers and other use cases where you typically do not run updates of the vendors. It is also a way to circumvent problems with git if you do not have a proper setup.
• --dry-run: If you want to run through an installation without actually installing a package, you can use --dry-run. This will simulate the installation and show you what would happen.
• --dev: Install packages listed in require-dev (this is the default behavior).
• --no-dev: Skip installing packages listed in require-dev.
• --no-scripts: Skips execution of scripts defined in composer.json.
• --no-plugins: Disables plugins.
• --no-progress: Removes the progress display that can mess with some terminals or scripts which don't handle backspace characters.
• --optimize-autoloader (-o): Convert PSR-0/4 autoloading to classmap to get a faster autoloader. This is recommended especially for production, but can take a bit of time to run so it is currently not done by default.

update

In order to get the latest versions of the dependencies and to update the composer.lock file, you should use the update command.

$ php composer.phar update

This will resolve all dependencies of the project and write the exact versions into composer.lock.

If you just want to update a few packages and not all, you can list them as such:

$ php composer.phar update vendor/package vendor/package2

You can also use wildcards to update a bunch of packages at once:

$ php composer.phar update vendor/*

Options

• --prefer-source: Install packages from source when available.
• --prefer-dist: Install packages from dist when available.
• --dry-run: Simulate the command without actually doing anything.
• --dev: Install packages listed in require-dev (this is the default behavior).
• --no-dev: Skip installing packages listed in require-dev.
• --no-scripts: Skips execution of scripts defined in composer.json.
• --no-plugins: Disables plugins.
• --no-progress: Removes the progress display that can mess with some terminals or scripts which don't handle backspace characters.
• --optimize-autoloader (-o): Convert PSR-0/4 autoloading to classmap to get a faster autoloader. This is recommended especially for production, but can take a bit of time to run so it is currently not done by default.
• --lock: Only updates the lock file hash to suppress warning about the lock file being out of date.
• --with-dependencies Add also all dependencies of whitelisted packages to the whitelist. So all packages with their dependencies are updated recursively.

require

The require command adds new packages to the composer.json file from the current directory.

$ php composer.phar require

After adding/changing the requirements, the modified requirements will be installed or updated.

If you do not want to choose requirements interactively, you can just pass them to the command.

$ php composer.phar require vendor/package:2.* vendor/package2:dev-master

Options

• --prefer-source: Install packages from source when available.
• --prefer-dist: Install packages from dist when available.
• --dev: Add packages to require-dev.
• --no-update: Disables the automatic update of the dependencies.
• --no-progress: Removes the progress display that can mess with some terminals or scripts which don't handle backspace characters.
• --update-with-dependencies Also update dependencies of the newly required packages.

global

The global command allows you to run other commands like install, require or update as if you were running them from the COMPOSER_HOME directory.

This can be used to install CLI utilities globally and if you add $COMPOSER_HOME/vendor/bin to your $PATH environment variable. Here is an example:

$ php composer.phar global require fabpot/php-cs-fixer:dev-master

Now the php-cs-fixer binary is available globally (assuming you adjusted your PATH). If you wish to update the binary later on you can just run a global update:

$ php composer.phar global update

search

The search command allows you to search through the current project's package repositories. Usually this will be just packagist. You simply pass it the terms you want to search for.

$ php composer.phar search monolog

You can also search for more than one term by passing multiple arguments.

Options

• --only-name (-N): Search only in name.

show

To list all of the available packages, you can use the show command.

$ php composer.phar show

If you want to see the details of a certain package, you can pass the package name.

$ php composer.phar show monolog/monolog

name     : monolog/monolog
versions : master-dev, 1.0.2, 1.0.1, 1.0.0, 1.0.0-RC1
type     : library
names    : monolog/monolog
source   : [git] http://github.com/Seldaek/monolog.git 3d4e60d0cbc4b888fe5ad223d77964428b1978da
dist     : [zip] http://github.com/Seldaek/monolog/zipball/3d4e60d0cbc4b888fe5ad223d77964428b1978da 3d4e60d0cbc4b888fe5ad223d77964428b1978da
license  : MIT

autoload
psr-0
Monolog : src/

requires
php >=5.3.0

You can even pass the package version, which will tell you the details of that specific version.

$ php composer.phar show monolog/monolog 1.0.2

Options

• --installed (-i): List the packages that are installed.
• --platform (-p): List only platform packages (php & extensions).
• --self (-s): List the root package info.

depends

The depends command tells you which other packages depend on a certain package. You can specify which link types (require, require-dev) should be included in the listing. By default both are used.

$ php composer.phar depends --link-type=require monolog/monolog

nrk/monolog-fluent
poc/poc
propel/propel
symfony/monolog-bridge
symfony/symfony

Options

• --link-type: The link types to match on, can be specified multiple times.

validate

You should always run the validate command before you commit your composer.json file, and before you tag a release. It will check if your composer.json is valid.

$ php composer.phar validate

status

If you often need to modify the code of your dependencies and they are installed from source, the status command allows you to check if you have local changes in any of them.

$ php composer.phar status

With the --verbose option you get some more information about what was changed:

$ php composer.phar status -v
You have changes in the following dependencies:
vendor/seld/jsonlint:
    M README.mdown

self-update

To update composer itself to the latest version, just run the self-update command. It will replace your composer.phar with the latest version.

$ php composer.phar self-update

If you would like to instead update to a specific release simply specify it:

$ composer self-update 1.0.0-alpha7

If you have installed composer for your entire system (see global installation), you may have to run the command with root privileges

$ sudo composer self-update

Options

• --rollback (-r): Rollback to the last version you had installed.
• --clean-backups: Delete old backups during an update. This makes the current version of composer the only backup available after the update.

config

The config command allows you to edit some basic composer settings in either the local composer.json file or the global config.json file.

$ php composer.phar config --list

Usage

config [options] [setting-key] [setting-value1] ... [setting-valueN]

setting-key is a configuration option name and setting-value1 is a configuration value. For settings that can take an array of values (like github-protocols), more than one setting-value arguments are allowed.

See the config schema section for valid configuration options.

Options

• --global (-g): Operate on the global config file located at $COMPOSER_HOME/config.json by default. Without this option, this command affects the local composer.json file or a file specified by --file.
• --editor (-e): Open the local composer.json file using in a text editor as defined by the EDITOR env variable. With the --global option, this opens the global config file.
• --unset: Remove the configuration element named by setting-key.
• --list (-l): Show the list of current config variables. With the --global option this lists the global configuration only.
• --file="..." (-f): Operate on a specific file instead of composer.json. Note that this cannot be used in conjunction with the --global option.

Modifying Repositories

In addition to modifying the config section, the config command also supports making changes to the repositories section by using it the following way:

$ php composer.phar config repositories.foo vcs http://github.com/foo/bar

create-project

You can use Composer to create new projects from an existing package. This is the equivalent of doing a git clone/svn checkout followed by a composer install of the vendors.

There are several applications for this:

1. You can deploy application packages.
2. You can check out any package and start developing on patches for example.
3. Projects with multiple developers can use this feature to bootstrap the initial application for development.

To create a new project using composer you can use the "create-project" command. Pass it a package name, and the directory to create the project in. You can also provide a version as third argument, otherwise the latest version is used.

If the directory does not currently exist, it will be created during installation.

php composer.phar create-project doctrine/orm path 2.2.*

It is also possible to run the command without params in a directory with an existing composer.json file to bootstrap a project.

By default the command checks for the packages on packagist.org.

Options

• --repository-url: Provide a custom repository to search for the package, which will be used instead of packagist. Can be either an HTTP URL pointing to a composer repository, or a path to a local packages.json file.
• --stability (-s): Minimum stability of package. Defaults to stable.
• --prefer-source: Install packages from source when available.
• --prefer-dist: Install packages from dist when available.
• --dev: Install packages listed in require-dev.
• --no-install: Disables installation of the vendors.
• --no-plugins: Disables plugins.
• --no-scripts: Disables the execution of the scripts defined in the root package.
• --no-progress: Removes the progress display that can mess with some terminals or scripts which don't handle backspace characters.
• --keep-vcs: Skip the deletion of the VCS metadata for the created project. This is mostly useful if you run the command in non-interactive mode.

dump-autoload

If you need to update the autoloader because of new classes in a classmap package for example, you can use "dump-autoload" to do that without having to go through an install or update.

Additionally, it can dump an optimized autoloader that converts PSR-0/4 packages into classmap ones for performance reasons. In large applications with many classes, the autoloader can take up a substantial portion of every request's time. Using classmaps for everything is less convenient in development, but using this option you can still use PSR-0/4 for convenience and classmaps for performance.

Options

• --optimize (-o): Convert PSR-0/4 autoloading to classmap to get a faster autoloader. This is recommended especially for production, but can take a bit of time to run so it is currently not done by default.
• --no-dev: Disables autoload-dev rules.

licenses

Lists the name, version and license of every package installed. Use --format=json to get machine readable output.

run-script

To run scripts manually you can use this command, just give it the script name and optionally --no-dev to disable the dev mode.

diagnose

If you think you found a bug, or something is behaving strangely, you might want to run the diagnose command to perform automated checks for many common problems.

$ php composer.phar diagnose

archive

This command is used to generate a zip/tar archive for a given package in a given version. It can also be used to archive your entire project without excluded/ignored files.

$ php composer.phar archive vendor/package 2.0.21 --format=zip

Options

• --format (-f): Format of the resulting archive: tar or zip (default: "tar")
• --dir: Write the archive to this directory (default: ".")

help

To get more information about a certain command, just use help.

$ php composer.phar help install

Environment variables

You can set a number of environment variables that override certain settings. Whenever possible it is recommended to specify these settings in the config section of composer.json instead. It is worth noting that the env vars will always take precedence over the values specified in composer.json.

COMPOSER

By setting the COMPOSER env variable it is possible to set the filename of composer.json to something else.

For example:

$ COMPOSER=composer-other.json php composer.phar install

COMPOSER_ROOT_VERSION

By setting this var you can specify the version of the root package, if it can not be guessed from VCS info and is not present in composer.json.

COMPOSER_VENDOR_DIR

By setting this var you can make composer install the dependencies into a directory other than vendor.

COMPOSER_BIN_DIR

By setting this option you can change the bin (Vendor Binaries) directory to something other than vendor/bin.

http_proxy or HTTP_PROXY

If you are using composer from behind an HTTP proxy, you can use the standard http_proxy or HTTP_PROXY env vars. Simply set it to the URL of your proxy. Many operating systems already set this variable for you.

Using http_proxy (lowercased) or even defining both might be preferable since some tools like git or curl will only use the lower-cased http_proxy version. Alternatively you can also define the git proxy using git config --global http.proxy <proxy url>.

no_proxy

If you are behind a proxy and would like to disable it for certain domains, you can use the no_proxy env var. Simply set it to a comma separated list of domains the proxy should not be used for.

The env var accepts domains, IP addresses, and IP address blocks in CIDR notation. You can restrict the filter to a particular port (e.g. :80). You can also set it to * to ignore the proxy for all HTTP requests.

HTTP_PROXY_REQUEST_FULLURI

If you use a proxy but it does not support the request_fulluri flag, then you should set this env var to false or 0 to prevent composer from setting the request_fulluri option.

HTTPS_PROXY_REQUEST_FULLURI

If you use a proxy but it does not support the request_fulluri flag for HTTPS requests, then you should set this env var to false or 0 to prevent composer from setting the request_fulluri option.

COMPOSER_HOME

The COMPOSER_HOME var allows you to change the composer home directory. This is a hidden, global (per-user on the machine) directory that is shared between all projects.

By default it points to /home/<user>/.composer on *nix, /Users/<user>/.composer on OSX and C:\Users\<user>\AppData\Roaming\Composer on Windows.

COMPOSER_HOME/config.json

You may put a config.json file into the location which COMPOSER_HOME points to. Composer will merge this configuration with your project's composer.json when you run the install and update commands.

This file allows you to set configuration and repositories for the user's projects.

In case global configuration matches local configuration, the local configuration in the project's composer.json always wins.

COMPOSER_CACHE_DIR

The COMPOSER_CACHE_DIR var allows you to change the composer cache directory, which is also configurable via the cache-dir option.

By default it points to $COMPOSER_HOME/cache on *nix and OSX, and C:\Users\<user>\AppData\Local\Composer (or %LOCALAPPDATA%/Composer) on Windows.

COMPOSER_PROCESS_TIMEOUT

This env var controls the time composer waits for commands (such as git commands) to finish executing. The default value is 300 seconds (5 minutes).

COMPOSER_DISCARD_CHANGES

This env var controls the discard-changes config option.

COMPOSER_NO_INTERACTION

If set to 1, this env var will make composer behave as if you passed the --no-interaction flag to every command. This can be set on build boxes/CI.

← Libraries | Schema →