composer/doc/articles/troubleshooting.md

Troubleshooting

This is a list of common pitfalls on using Composer, and how to avoid them.

General

1. Before asking anyone, run composer diagnose to check for common problems. If it all checks out, proceed to the next steps.

2. When facing any kind of problems using Composer, be sure to work with the latest version. See self-update for details.

3. Make sure you have no problems with your setup by running the installer's checks via curl -sS https://getcomposer.org/installer | php -- --check.

4. Ensure you're installing vendors straight from your composer.json via rm -rf vendor && composer update -v when troubleshooting, excluding any possible interferences with existing vendor installations or composer.lock entries.

5. Try clearing Composer's cache by running composer clear-cache.

Package not found

1. Double-check you don't have typos in your composer.json or repository branches and tag names.

2. Be sure to set the right minimum-stability. To get started or be sure this is no issue, set minimum-stability to "dev".

3. Packages not coming from Packagist should always be defined in the root package (the package depending on all vendors).

4. Use the same vendor and package name throughout all branches and tags of your repository, especially when maintaining a third party fork and using replace.

5. If you are updating to a recently published version of a package, be aware that Packagist has a delay of up to 1 minute before new packages are visible to Composer.

6. If you are updating a single package, it may depend on newer versions itself. In this case add the --with-dependencies argument or add all dependencies which need an update to the command.

Package not found on travis-ci.org

1. Check the "Package not found" item above.

2. If the package tested is a dependency of one of its dependencies (cyclic dependency), the problem might be that Composer is not able to detect the version of the package properly. If it is a git clone it is generally alright and Composer will detect the version of the current branch, but travis does shallow clones so that process can fail when testing pull requests and feature branches in general. The best solution is to define the version you are on via an environment variable called COMPOSER_ROOT_VERSION. You set it to dev-master for example to define the root package's version as dev-master. Use: before_script: COMPOSER_ROOT_VERSION=dev-master composer install to export the variable for the call to composer.

Package not found in a Jenkins-build

1. Check the "Package not found" item above.
2. Reason for failing is similar to the problem which can occur on travis-ci.org: The git-clone / checkout within Jenkins leaves the branch in a "detached HEAD"-state. As a result, Composer is not able to identify the version of the current checked out branch and may not be able to resolve a cyclic dependency. To solve this problem, you can use the "Additional Behaviours" -> "Check out to specific local branch" in your Git-settings for your Jenkins-job, where your "local branch" shall be the same branch as you are checking out. Using this, the checkout will not be in detached state any more and cyclic dependency is recognized correctly.

Need to override a package version

Let's say your project depends on package A, which in turn depends on a specific version of package B (say 0.1). But you need a different version of said package B (say 0.11).

You can fix this by aliasing version 0.11 to 0.1:

composer.json:

{
    "require": {
        "A": "0.2",
        "B": "0.11 as 0.1"
    }
}

See aliases for more information.

Memory limit errors

If composer shows memory errors on some commands:

PHP Fatal error: Allowed memory size of XXXXXX bytes exhausted <...>

Check first that XDebug is not loaded in your php.ini by running composer diagnose. If XDebug is loaded, you should disable it by commenting the line zend_extension=path/to/xdebug in your php.ini. Don't forget to enable XDebug again after using Composer, if you need it.

If composer still raises the error, the PHP memory_limit should be increased.

Note: Composer internally increases the memory_limit to 1G.

To get the current memory_limit value, run:

php -r "echo ini_get('memory_limit').PHP_EOL;"

Try increasing the limit in your php.ini file (ex. /etc/php5/cli/php.ini for Debian-like systems):

; Use -1 for unlimited or define an explicit value like 2G
memory_limit = -1

Or, you can increase the limit with a command-line argument:

php -d memory_limit=-1 composer.phar <...>

Xdebug impact on Composer

Running Composer console commands while the php extension "xdebug" is loaded reduces speed considerably. This is even the case when all "xdebug" related features are disabled per php.ini flags, but the php extension itself is loaded into the PHP engine. Compared to a cli command run with "xdebug" enabled a speed improvement by a factor of up to 3 is not uncommon.

Note: This is a general issue when running PHP with "xdebug" enabled. You shouldn't load the extension in production like environments per se.

Disable "xdebug" in your php.ini (ex. /etc/php5/cli/php.ini for Debian-like systems) by locating the related zend_extension directive and prepending it with ; (semicolon):

;zend_extension = "/path/to/my/xdebug.so"

If you do not want to disable it and want to get rid of the warning you can also define the COMPOSER_DISABLE_XDEBUG_WARN environment variable.

"The system cannot find the path specified" (Windows)

1. Open regedit.
2. Search for an AutoRun key inside HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor, HKEY_CURRENT_USER\Software\Microsoft\Command Processor or HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\Command Processor.
3. Check if it contains any path to non-existent file, if it's the case, just remove them.

API rate limit and OAuth tokens

Because of GitHub's rate limits on their API it can happen that Composer prompts for authentication asking your username and password so it can go ahead with its work.

If you would prefer not to provide your GitHub credentials to Composer you can manually create a token using the following procedure:

1. Create an OAuth token on GitHub. Read more on this.

2. Add it to the configuration running composer config -g github-oauth.github.com <oauthtoken>

Now Composer should install/update without asking for authentication.

proc_open(): fork failed errors

If composer shows proc_open() fork failed on some commands:

PHP Fatal error: Uncaught exception 'ErrorException' with message 'proc_open(): fork failed - Cannot allocate memory' in phar

This could be happening because the VPS runs out of memory and has no Swap space enabled.

free -m

total used free shared buffers cached
Mem: 2048 357 1690 0 0 237
-/+ buffers/cache: 119 1928
Swap: 0 0 0

To enable the swap you can use for example:

/bin/dd if=/dev/zero of=/var/swap.1 bs=1M count=1024
/sbin/mkswap /var/swap.1
/sbin/swapon /var/swap.1

Degraded Mode

Due to some intermittent issues on Travis and other systems, we introduced a degraded network mode which helps Composer finish successfully but disables a few optimizations. This is enabled automatically when an issue is first detected. If you see this issue sporadically you probably don't have to worry (a slow or overloaded network can also cause those time outs), but if it appears repeatedly you might want to look at the options below to identify and resolve it.

If you have been pointed to this page, you want to check a few things:

• If you are using ESET antivirus, go in "Advanced Settings" and disable "HTTP-scanner" under "web access protection"

• If you are using IPv6, try disabling it. If that solves your issues, get in touch with your ISP or server host, the problem is not at the Packagist level but in the routing rules between you and Packagist (i.e. the internet at large). The best way to get these fixed is raise awareness to the network engineers that have the power to fix it.

  To disable IPv6 on Linux, try using this command which appends a rule preferring IPv4 over IPv6 to your config:

  sudo sh -c "echo 'precedence ::ffff:0:0/96 100' >> /etc/gai.conf"

• If none of the above helped, please report the error.